100% solid epoxy floor coatings across Richmond, Kearney and nearby Missouri communities. Diamond-ground prep, industrial-grade materials, 15-year warranty. Garage, basement, commercial.
Epoxy Flooring Kansas City
Epoxy flooring is a two-part resin system — epoxy resin mixed with a hardener — that, when applied to properly prepared concrete, creates an extremely hard, chemically resistant base coat. The key word is properly prepared: without mechanical diamond grinding to open the concrete surface, epoxy sits on top of the slab rather than penetrating into it. That's the difference between a floor that lasts 15 years and one that peels in 18 months.
Epoxy products range from water-based systems at 30–50% solids (common at home improvement stores) to 100% solids industrial formulations. We use 100% solids epoxy exclusively. The difference is straightforward: 100% solids means 100% of what you apply stays on the floor after curing. A 50% solids product loses half its volume to evaporation, leaving a significantly thinner film that bonds less deeply and degrades faster.
In our standard installation system, 100% solids epoxy is the base coat — applied after diamond grinding and primer, with decorative flake broadcast into the wet surface. A UV-stable polyaspartic topcoat is then applied over the cured epoxy to provide UV stability, scratch resistance, and the fast-cure properties that allow same-day topcoating. This hybrid approach gives you the best of both systems.
Free on-site estimates. Clear pricing. No obligation.
Request a Free Estimate 📞 (816) 419-4287Frequently Asked Questions
100% solids epoxy leaves a full-thickness film after curing — nothing evaporates. Water-based epoxy loses 50–70% of its volume to evaporation, leaving a thin, weak film that bonds poorly and fails quickly. We use 100% solids exclusively.
A properly installed 100% solids epoxy and polyaspartic system lasts 15–20 years with normal use. We back every install with a 15-year written warranty.
Yes — with proper assessment. We test for moisture, evaluate existing coatings, and assess slab condition before recommending a system. Most concrete floors are good candidates with the right prep.
Helpful Next Steps
Compare systems, check colors, and get a quick price range before scheduling your free estimate.
Garage floor coatings · Flake color options · Instant price calculator · Richmond service area
INSTANT PRICING
Use our instant price calculator and get a ballpark project range in about 60 seconds — no contact info required to see results.
⚡ Get My Instant PriceOr call us at (816) 419-4287 — same-day responses Mon–Fri
Free, no-pressure on-site estimate. We respond within 24 hours.